Middle?... hmm..... ! ... you may be right there.... I still have the middle one for my keybed but its been so long since I took a screw out of the middle for the panel....Ive been on and off the road with only the two panel screws for a couple decades....
-----Original Message-----
From: "David Rogoff" <
david@...>
To:
yamahacs80@yahoogroups.comCc:
yamahacs80@yahoogroups.comDate: 09/03/12 15:47
Subject: [POSSIBLE SPAM] Re: [yamahacs80] Re: Introduction and stuck button question
Laurie,
What about the third one in the middle? Have you opened yours so many times you lost that one?
David (who needs to open one up this evening)
Sent from my iPhone
On Sep 3, 2012, at 1:29 PM, "Laurie Curry" <laurie@...> wrote:
>
> 2 long phillips screws is all it takes to open the panel.... just look at the point where the front angle turns flat on the bottom of the CS80... one screw about an inch from each end... you will know its the right one if its 8 inches long..
>
>
> -----Original Message-----
> From: theblackbutterflygang <theblackbutterflygang@...>
> To: yamahacs80@yahoogroups.com
> Date: 09/03/12 14:33
> Subject: [POSSIBLE SPAM] [yamahacs80] Re: Introduction and stuck button question
>
>
>
> How difficult is it to open this synth and access the panel button?
>
> I'd be really, really grateful for some help.
>
> thanks,
> ian
>
> --- In yamahacs80@yahoogroups.com, "theblackbutterflygang" <theblackbutterflygang@...> wrote:
>>
>>
>> Hi folks,
>>
>> I haven't had any luck finding a repair person in the San Francisco Bay Area to fix the stuck button issue on my CS80. I'd like to get this quirk fixed so I can sell the beautiful girl with a clean bill of health.
>>
>> I've checked with Chris from This Old Synth, the fellow from Synthparts and analogsynthservice.com.
>>
>> Any other ideas?
>>
>> thanks guys!
>>
>>
>>
>>
>> --- In yamahacs80@yahoogroups.com, "theblackbutterflygang" <theblackbutterflygang@> wrote:
>>>
>>> Hi Folks,
>>>
>>> I'm the proud owner of a CS80. She is in lovely condition but has developed a quirk and I could use a little in fixing it. The panel 2 button is "stuck" on. The button moves freely but the presets are engaged only when held down. Any help here would be wonderful.
>>>
>>> thanks,
>>> Ian
>>>
>>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
[Non-text portions of this message have been removed]