Archive of the former Yahoo!Groups mailing list: Yamaha CS80

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [yamahacs80] Re: powering up

From: David Rogoff <david@...>
Date: 2012-03-25

Don't forget: if you power up the PS disconnected from the synth, you
need to jumper the 2 sense inputs (+8.5v and -6.5v I think) to their
respective outputs or things will be bad! And, since the PS is linear
(not switching) you could bring it up on a variac after you replace the
caps and stuff.

David

> robert hall <mailto:rbhall7ice@...>
> March 24, 2012 5:40 PM
> hey thanks-that does sound like good advice.i'm wondering if i should get inside or have someone else do it.ive built a couple of simple tube amps but i'd still like someone withexperience to do it.-there was i guy at musiktek in north hollywood who was very goodbut he's in canada now.anybody out there? -i'm in l.a. obviously-thanks again for the support,robert
>
> --- On Sat, 3/24/12, Quazimodo<noddyspuncture@...> wrote:
>
> From: Quazimodo<noddyspuncture@...>
> Subject: [yamahacs80] Re: powering up
> To: yamahacs80@yahoogroups.com
> Date: Saturday, March 24, 2012, 1:26 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi Robert,
>
> Personally I would rebuild the PSU - with new caps and IC's. And then I would set the voltages with the PSU seperate from the rest of the synth. Then I would power her up and see what happens.
>
> Cheers,
>
> TOM
>
>
>
> --- In yamahacs80@yahoogroups.com, "robert"<rbhall7ice@...> wrote:
>
>
>> hey everyone-
>
>> i have not turned my instrument on since about 1998 and was wondering if
>
>> the sudden power might hurt it (capacitors and such)
>
>> can it be brought up slow with a variac as some do with audio gear?
>
>> -i'm not a technician so excuse my ignorance please.
>
>> thanks for any guidance,
>
>> robert
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
> Quazimodo <mailto:noddyspuncture@...>
> March 24, 2012 1:26 PM
> Hi Robert,
> Personally I would rebuild the PSU - with new caps and IC's. And then
> I would set the voltages with the PSU seperate from the rest of the
> synth. Then I would power her up and see what happens.
> Cheers,
> TOM
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]