Hi thanks. You dont need the remove the wires , there is enough cable lenght to work , i did it to clean the boards , the boards was completely covered with a strange brown goopy stuff , was in a barn for 20yrs so , no wonder !
pwm is repaired , forgot to wire the pwm vco output .. hihihi
tonight is the silent voice repair time .. this one is more uncertain ,, VCA perhaps ,,,,.
next time !
--- In yamahacs80@yahoogroups.com, "galaxiesmerge" <galaxiesmerge@...> wrote:
>
> Hi,
>
> Wow! What a great job :)
>
> This really is very inspirational! I am currently working on restoring a SynergyII+ and SynergyI with a microcontroller board, then, if I succeed I will take on the KAS board and a few other things in my CS80 --- it is very overdue for a complete overhaul but I have just been wary of all that wiring! I'll just have to go real slow but your story is really very inspiring.
>
> Thanks :)
>
> --- In yamahacs80@yahoogroups.com, "zenithaudio2003" <zenithaudio2003@> wrote:
> >
> > working at 95% . The bugs left are from the rewiring , i have surely made some mistake on rewiring the 4 tone matrix boards . also need to find some fresher CD4006 .
> >
> > The hardest part was to learn the schematic . and to lift the synth on the bench cause as you will in the video i am a skinny dude 200lbs is quite a load for me ;) .
> >
> > the pw width lfo is bogus . Could be a simple return from the tone matrix .
> > tolex need to be replaced .
> > wood siding have to go to the piano finish shop . IS IT CHERRY WOOD !!!
> > miswired tone matrixs . ANd replace the temporary spliced wires .
> > Some parts still need to be find.
> > 1 gate is not trigging ( wirering ? )
> >
> > still got more than 50hrs of works.
> >
> > here is the youtube link.
> >
> > http://www.youtube.com/watch?v=EyQPKA5o2oc&feature=channel_page
> >
> > regards .
> >
>