"No voice 3 on channel 2, but ONLY in panel mode???? This seems like a weird issue...
"
are you sure that every panel function works in either of the memory slots for voice 3? i have seen a particular function of a voice fail(vcf,eg,etc), and it appears as certain presets not functioning.
also, on the aftertouch, when i re-chipped and socketed all the lower boards, i had a bad new CMOS chip on the LARGER board(tks? cant remember name now). it caused the aftertouch to go out completely. all i remember was that it was in the row farthest away from the manual.....
--- On Mon, 3/30/09, Heath Finnie <heathfinnie@...> wrote:
From: Heath Finnie <heathfinnie@...>
Subject: [yamahacs80] CS-80 almost working again! (no aftertouch and missing a voice)
To: yamahacs80@yahoogroups.com
Date: Monday, March 30, 2009, 6:56 PM
Thought I would update the list on my CS-80 work thats been going on. I had help in fixing some of these problems which is great since some of them to me were stumpers.
Here is what has been done:
Power supply rebuilt
Ring Modulator envelope fixed (bad IG00159)
Output hi/low switch rebuilt
constant pitch/loss of pitch controls (bad trace on the BA board)
Funky 3 would not sound (bad transistor on the BA board)
Some things that are left to do and a bit of a mystery:
No aftertouch. (The aftertouch worked when I got the synth but now I have none on any key on either channel which makes me think its something global. The voltages seem to be fine on the TKS board....)
No voice 3 on channel 2, but ONLY in panel mode???? This seems like a weird issue...
And last will be a full calibration.
[Non-text portions of this message have been removed]