Try the TS board , maybe there is the selecor (iG00157) on the first channel in need to be changed...
M
----- Original Message -----
From: Heath Finnie
To: yamahacs80@yahoogroups.com
Sent: Wednesday, November 26, 2008 3:30 AM
Subject: [yamahacs80] Presets staying the same when selecting?
On my CS-80 I noticed that some of the presets are not switching properly. For instance,
Brass 1 and Flute are the same. I once had a similar problem with the footage (on Channel 2
8' and 5 1/3' were both playing an 8') and it turned out that two diodes were touching on the
board. Separated the diodes and the footage returned.
I checked on the T51 and T52 boards, but saw nothing similar going on. Any other ideas
what might cause this behavior? Only certain ones are doing it also.
Thanks,
Heath
[Non-text portions of this message have been removed]