--- In
yamahacs80@yahoogroups.com, rj krohn <r_j_d_2.phila@...> wrote:
>
> hi folks, im wondering if anyone has some insight into this....
>
> i dropped an m-board into my cs80 that came from a cs60. all of the
EG and VCF functions seem to work properly, but it is 1 octave lower.
i assumed i would just tune it up an octave, but then realized that
those metal trimmers, i believe, are not "infinite" pots, i.e. i dont
think i will be able to tune them up. is there something else i should
be doing? a jumper/mod on the board? thanks alot for your help.
There are some resistors that are different on the CS50/60 version of
the M-Board. Look at the tables on the right side of the schematic
here:
http://therogoffs.com/cs80/manuals/CS80_Service_Manual/41%20-%20M%20Circuit%20Diagram.jpgAssuming you have the M-Board you replaced, grab the resistors from it.
David