I also bought matching wingnuts and screwed and epoxied them onto the
bolts to give them a handle that can be screwed in by hand.
Rick wrote:
> JL measured them for me.. here is the info for the archives
>
> 8 X 1.25 thread, 25 mm long
>
> -rick
>
>
> --- In yamahacs80@yahoogroups.com, "Rick" <echo7even@...> wrote:
> >
> > in an older post David Rogoff claims they are metric #8 bolts...hmm
> >
> > -r
> >
> >
> >
> >
> > --- In yamahacs80@yahoogroups.com, "Rick" <echo7even@> wrote:
> > >
> > > hm..some people are really good at telling threads by looking at
> > > them.. My friend Richard is great with that sort of thing.. me.. not
> > > so much.. i think japan is on the metric system
> > >
> > > not sure if this would help:
> http://www.skgrimes.com/adapter/index2.htm
> > >
> > >
> > >
> > >
> > >
> > > --- In yamahacs80@yahoogroups.com, rj krohn <r_j_d_2.phila@> wrote:
> > > >
> > > > rick, i can pull one out, but i dont know how i would accurately
> > > describe the thread size. its definitely not "machine screw thread"
> > > type, and i remember the shaft to be around 2" long. tell me know i
> > > can accurately measure it and i can help you out....
> > > >
> > > > Rick <echo7even@> wrote: would
> > > someone with the original leg hardware mind pulling one of the
> > > > handscrews out and posting info about shaft length and thread
> size to
> > > > the group.. if I can get this info I will hunt down a sub and
> post a
> > > > link as well. I'd like to get some handscrews to keep my synth
> > > together
> > > >
> > > > there should be 4 of these to attach the stand.. and one to
> keep the
> > > > stand together in the middle.
> > > >
>