> I mentioned it before in this group, I use pedestals (as used in
> office-furniture) as stands for both my CS80's. Dimensions are:
60cm
> height, 80cm length, 40cm depth. They have 4 casters (not too
small)
> so you can easily move the CS80 around.
That sounds very close to what I have in mind!
I'll have to find something with the right height, though, to play
the CS-80 comfortably while sitting down.
> Good luck with restoring (do you have to ?)your CS80 when it gets
> in !
It has just been serviced. I guess I'll have to re-tune it after its
voyage to Germany, and I'll have to re-connect the PSU for something
close to 230V.
220V probably was a factory option. My idea is not to use two 110V
windings in series, but a 110V and the 117V, if the topology allows
it. That would reduce stress on the PSU components and also reduce
heat a little.
Has anybody made such a 227V modification on his CS-80 sucessfully
yet?
JH.
>
> --- In yamahacs80@yahoogroups.com, "dark_november2000" <jhaible@>
> wrote:
> >
> > I've been loosely watching this group for some time as a CS-50
and
> CS-
> > 60 owner. Seems I've just upgraded to a full member (;->), though
> my
> > object of desire is still located at the other end of the world.
> >
> > So ... in anticipation of the beast that will soon be taking over
> my
> > little studio ... I'm looking for a keyboard stand for a CS-80.
> > Most of what I find in stores isn't fit for 200 pounds.
> >
> > Can you recommend anything?
> > Doesn't even have to be dedicated for keyboards ...
> > I even think about making my own, with castors for moving it from
> the
> > wall for servicing and moving it back for playing.
> >
> > Any ideas, any recommendations would be welcome.
> >
> > JH.
> >
>