Start be replacing the part that phisically seems as they were
affected by the corrosion and retrace all bad (black) traces... does
sound like a programmer problem
--- In
PolySix@yahoogroups.com, Tommy Lindström <groovedoctor23@y...>
wrote:
> The sympthoms - the synth sound strange and I can't Switch the bank
led's correctly. When I switch the synth on bank 1,2,4,7 are on. +
to tape, from tape and error cancel. / tommy
> gil_we <gil_we@y...> skrev::What are the sympthoms ? generally it
is needed to retace the corroded
> traces and replace parts that are places over or near them.
>
> See the procedure description here:
>
> http://www.oldcrows.net/~oldcrow/synth/korg/polysix/repair.html
>
>
>
>
> --- In PolySix@yahoogroups.com, "groovedoctor23"
<groovedoctor23@y...>
> wrote:
> > I have problem with my korg polsix- the battery problem. I have
> tried
> > to clean the klm367 board and replaced the ic30 and ic31 and also
> > changed the battery/ not working after this . I'm not so good on
> > electronic so I can't do anymore than this. I wonder if anyone
can do
> > the repair or have a fully working klm367 board to sell.
> >
> >
> > Tommy sweden
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/PolySix/
>
> To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
> [Non-text portions of this message have been removed]