Hi,
i resolved the problem replacing the cristal quartz from the key
assigner CPU.
Hope this works for you !
Good luck
--- In PolySix@yahoogroups.com, "Guille" <guille@e...> wrote:
> Hi, Oxygeno!
> And how did you solve the arpegiator problem? i've got the same one!
>
> Thanks.
>
> Guille
> ----- Original Message -----
> From: oxygeno1313
> To: PolySix@yahoogroups.com
> Sent: Tuesday, December 14, 2004 5:17 AM
> Subject: [PolySix] Re: Polysix keyboard assigner fixed !!!!
>
>
>
> I'm happy now because i finally could fix my POLYSIX, the problem
was
> the quartz, both quartz were failing, so i want to say thanks to
> Johannes, Greg Montalbano and Old Crow for the Support !!! They
did a
> great job !
>
>
> Greetings and happy holidays,
>
> oxygeno1313
>
>
> --- In PolySix@yahoogroups.com, "oxygeno1313" <oxygeno1313@y...>
> wrote:
> >
> >
> > Hi everybody,
> >
> > i'm new here in the group,, and i got a problem with a P6. The
> first
> > thing, is the KLM-367 board, was a victim of the battery
leackage,
> > but someone made the repair before i bought the P6. I discover
that
> > the control pots have some latency and tjhere's no clean sweep
on
> the
> > pots, sounds like steps and latency. i checkd every trace that
goes
> > to the CPU 8048 and all the traces are fine, i used a DVM to
check
> > them. Also i replaced the bus drivers 74LS08 and everythings is
> fine,
> > i cannot find the fail.
> >
> > The 2nd problem is the key assigner, something is wrong ! When
i
> play
> > the keyboard exhist some latency after i play a note, the ARP
are
> not
> > rhythmic, there's like .... 1-22222-3-4-5555-6 it should be 1-2-
3-4-
> 5-
> > 6, some notes hang some milliseconds but not always is the same
> VCO.
> > I exchanged the 8049 and replaced some IC's related to the CPU,
but
> > the problem persist. I check too many times the connectors and
> > traces, but nothing out of normal.
> >
> >
> > I was searching and reading almost all the messages from this
> forum,
> > but seems that this is thhe first case of this problem.
> >
> >
> > Hope someone can help to find the problem.
> >
> > Regards,
> >
> > oxygeno
> >
> > P.D. Sorry for my bad english ! Cheers
>
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> --------------------------------------------------------------------
----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/PolySix/
>
> b.. To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]