Hi, Oxygeno!
And how did you solve the arpegiator problem? i've got the same one!
Thanks.
Guille
----- Original Message -----
From: oxygeno1313
To: PolySix@yahoogroups.com
Sent: Tuesday, December 14, 2004 5:17 AM
Subject: [PolySix] Re: Polysix keyboard assigner fixed !!!!
I'm happy now because i finally could fix my POLYSIX, the problem was
the quartz, both quartz were failing, so i want to say thanks to
Johannes, Greg Montalbano and Old Crow for the Support !!! They did a
great job !
Greetings and happy holidays,
oxygeno1313
--- In PolySix@yahoogroups.com, "oxygeno1313" <oxygeno1313@y...>
wrote:
>
>
> Hi everybody,
>
> i'm new here in the group,, and i got a problem with a P6. The
first
> thing, is the KLM-367 board, was a victim of the battery leackage,
> but someone made the repair before i bought the P6. I discover that
> the control pots have some latency and tjhere's no clean sweep on
the
> pots, sounds like steps and latency. i checkd every trace that goes
> to the CPU 8048 and all the traces are fine, i used a DVM to check
> them. Also i replaced the bus drivers 74LS08 and everythings is
fine,
> i cannot find the fail.
>
> The 2nd problem is the key assigner, something is wrong ! When i
play
> the keyboard exhist some latency after i play a note, the ARP are
not
> rhythmic, there's like .... 1-22222-3-4-5555-6 it should be 1-2-3-4-
5-
> 6, some notes hang some milliseconds but not always is the same
VCO.
> I exchanged the 8049 and replaced some IC's related to the CPU, but
> the problem persist. I check too many times the connectors and
> traces, but nothing out of normal.
>
>
> I was searching and reading almost all the messages from this
forum,
> but seems that this is thhe first case of this problem.
>
>
> Hope someone can help to find the problem.
>
> Regards,
>
> oxygeno
>
> P.D. Sorry for my bad english ! Cheers
PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/PolySix/
b.. To unsubscribe from this group, send an email to:
PolySix-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]