Hi brainslayer,
Thanks for the quick reply. Just to make sure I understand you correctly, If
it were the chip itself I would hear it only in poly and not unison mode? Or,
are you saying hold down six notes in poly mode and it would affect only one of
the notes? My apologies if I'm being thick-headed here.
dizz
Quoting BrainSlayer <
brainslayer@c-u-d.de>:
> if the filter chip would be the source of that issue, you would only hear it
> at one of the six voices and not at all. so be sure it isnt the filter.
> ----- Original Message -----
> From: dizz662000
> To: PolySix@yahoogroups.com
> Sent: Tuesday, July 20, 2004 4:27 AM
> Subject: [PolySix] VCF cutoff quirkiness
>
>
> Hi, this is my my first post to this group. I bought a Polysix
> recently realizing they're very old. Actually played guitar mainly
> in the 80's but there was always a PSix in my basement studio.
> Background: this unit had maintenance performed by Korg in the 80's
> and the battery was lifted into a socket before any damage occurred.
> It works pretty good except; I noticed some volume issues (not being
> very responsive to cranking it up!) I believe I solved this issue by
> working the volume pot a few times-maybe a scratchy pot in need of
> cleaning. More importantly, there's an issue with the VCF cutoff. It
> doesn't track well when at the lower freqs. When I move the knob it
> sounds like it's dirty and cuts in and out. When it's stationary (not
> moving) the freq cuts off where it should. Just to be clear, I can set
> it any where and get the correct cutoff, it just takes some tweaking
> at the lower end. This again sounds like maybe a dirty pot. I have
> heard that the filter chip set may be going?? Not a tech head myself.
> Sorry for being longwinded but I need to keep this dinosaur roaring!!
> Any feedback would be appreciated
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> ------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/PolySix/
>
> b.. To unsubscribe from this group, send an email to:
> PolySix-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> Yahoo! Groups Links
>
>
>
>
>
>