Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [PolySix] Re: KLM-367 Clone D/A Adjustment impossible

From: <backshall1@bellsouth.net>
Date: 2018-09-15

Back before we knew the ground was missing between C22 and C23, the workaround was to use 10pf for C23 instead of 22pf. With the correct ground connection, C23 should be the original 22pf, not 10pf. Maybe try that.
Don B.
 
Sent: Friday, September 14, 2018 1:48 PM
Subject: [PolySix] Re: KLM-367 Clone D/A Adjustment impossible
 
 

I've replaced the IC27 ( TL072 ) by the original ( 4560 ). Problem is still the same.
I've replaced the X1 Clock by the original clock, problem is still the same.
 
The only thing is strange is that IC27 is a bit hot.
 
I'm lost this time. Hope someone has the solution?
Thanks