Thank you Johannes for the information I'll try to make it ASAP!!
Fritz.
--- In
PolySix@yahoogroups.com, Johannes Hausensteiner
<jo.synth@c...> wrote:
> The ARP Trig in Jack is what it says - an input for triggering the
> ARP from an external source. If you want to sync one Polysix (the
> Poly61 is the same in this respect) to another you cannot do this
> as is. But it should be easy to modify the synth to supply the ARP
> clock signal; e.g. via a normalized jack. The ARP clock signal is
> routed through the ARP IN jack this way:
>
> tip sleeve
> to Key Assigner CPU ------<---V |#|
> ^ | |
> | |#|
> from ARP clock generator ------>-+ |
> ---
>
> You can do this:
> tip sleeve
> to Key Assigner CPU ------<--V |#|
> ^ | |
> | ^ |#|
> from ARP clock generator ------>-∗--+ |
> ring ---
>
> The ARP clock signal has a 10k resistor in series - it is save to
> short to ground with a normal (mono) plug. To just take the signal
> for syncing a second machine you have to make a special cable:
> a stereo plug to a mono plug, connecting tip to ring in the stereo
> plug.
>
> Johannes
>
>
> polyboly wrote:
> > Hi, does anyone know how can I sync the arpg. of a polysix and a
poly
> > 61?
> >
> > Thanks
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > PolySix-unsubscribe@yahoogroups.com
> >
> > PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ > >
> >
> >
> >