Hello there the nightmare has begun just kiding I first got my
polysix it was promised that it work perfect
hahahhahahahahahahahhhahah
my main board was gone the things that where happing where all the
lights where staying on and it would only make one sound that I realy
got tierd of keys where not responding at all nothing work except that
old stupid noise over and over and over but it now works and it was
totaly worth every bit of sweat its not hard at all you just have to
know that the main board that the battery is on is almost always the
problem the ic next to the battery could have bad traces under the ic
chip so you should remove the ic chip first then review the board and
traces u may have to replace the traces and then the battery should
be replaced with a coin type battery the old crow has this all step
by step take note that u should know how to solder real good take
your time and read the info over and over let me know if you need
help we could set up a time to chat and get that board up and running
on chat on the computer that is
later Sam
--- In
PolySix@yahoogroups.com, greg montalbano
<greg.montalbano@u...> wrote:
> At 04:58 AM 11/13/03 +0000, you wrote:
>
> >I will be giving it the ol' tinkerer's go at it first I think. I
> >figure, it's not usable to me until it's fully functional (I've
been
> >through trying to use a crippled CS-80 and it really became
> >frustrating), so if I'm successful then good for me, but if I'm
not I
> >get the board fixed or replaced and it's still good for me.
>
> OK -- just be sure you have a copy of the schematics, and some
patience.
>
>
> >I think I've made up my mind since I posted intially that I'll try
> >and learn from this first. Then, if I'm not successful, Old Crow
> >could bail me out (for a fee, of course).
>
> You won't go far wrong with Scot (the Old Crow).
>
> >I hope I'm successful,
> >because it'll just really enhance the relationship I'll have with
the
> >instrument. Not to say swapping boards wouldn't be enough, but, I
> >guess it's a goofy thing. I'm very excited to get it working no
> >matter how it occurs.
>
> I know the feeling -- I've done quite a few of these, and they
really ARE
> repairable; just a matter of how thorough you want to be. I'm a
great
> believer in self-maintenance & learning by doing; just so you're
careful
> not to do more harm than good.
> If you get to the point, you could mail the board to me here in
California
> (no Arnold jokes, please; it's bad enough having to live here) & I
could
> go over it.
>
> Good luck.
>
> ~G
>
>
>
> [Non-text portions of this message have been removed]