Hi guys
I installed the Kiwisix upgrade including the power supply upgrade for my Polysix. But not because of battery damage. But due to the MG going all wrong.
It was in perfect tune before the upgrade.
However it is not possible now. I have tried following the tuning procedure as specified in the Kiwisix manual. But no luck.
The problem is as follows:
It is not possible to tune the key c as the note c. The highest possible note is B sharp. And that is when VR1 is fully clockwise. I did check that the pitch and mod wheels where at their default setting.
Turning VR1 from fully counterclockwise to fully clockwise only changes the pitch 1 semitone.
The scaling is totally off. It seems to track okay in the upper octaves except for voice 6.
Voice 6 does not track good at all at any octave.
VR2 seems to have no effect at all.
KLM-366b is a late model. Without the daughter board.
Thanks for your time. I really hope someone can help bring my love back to life.
There are no synth techs in Denmark.
Kind regards
Mads