Guys, please be careful with disclosing any personal/financial information on this list.
Thanks,
Ben (moderator)
On 26 sep. 2011, at 18:52, Mike wrote:
> Thanks again Don. I'm going to drop it off in the mail today. Please let me know how much this whole ordeal is going to cost and I will promptly send you a PayPal payment.
>
> -Mike
>
> --- In PolySix@yahoogroups.com, "backshall1" <backshall1@...> wrote:
>>
>> Hi Mike,
>>
>> I can take a look at your board if you want to mail it to me. I have a
>> couple of boards to compare it to and most of the parts for another one.
>>
>> Don Backshall
>>
>> 10200 Roadstead Way West
>>
>> Raleigh NC 27613
>>
>>
>>
>> _____
>>
>> From: PolySix@yahoogroups.com [mailto:PolySix@yahoogroups.com] On Behalf Of
>> Mike
>> Sent: Saturday, September 17, 2011 8:21 PM
>> To: PolySix@yahoogroups.com
>> Subject: [PolySix] Re: KLM 367 Clone Problems...
>>
>>
>>
>>
>>
>> Well,my PolySix has been on the back burner for a while now.. I fixed the
>> PSU issue and it looks like it messed up somehting on my KLM-367 board. So,
>> my KLM-367 board is even worse now and I haven't done anything to it since
>> my last post.
>>
>> Is there anyone in the states that would be interested in taking a look at
>> my KLM-367 board?
>>
>> -Mike
>> 312-363-7286
>>
>> --- In PolySix@yahoogroups.com <mailto:PolySix%40yahoogroups.com> , "Mike"
>> <mborish_2000@> wrote:
>>>
>>> Well, I guess I goofed and something is wrong with my clone board.
>> Unfortunately, my PSU had a lead break from opening and closing the synth so
>> I can't test any further until I fix the PSU and order the fuses. Can I sub
>> a 2n3904 for the Q5 2SC945? I dropped in another 367 board that I had lying
>> around and everything worked as it should with the exception of a couple
>> buttons because somebody spilled a drink on it years ago.
>>>
>>> Here's my question, is there anybody in the USA that would be interested
>> in fixing my KLM-367 clone board if I mailed it to them? It's probably
>> something stupid but I don't have the time or the parts available to really
>> test it. The last time I powered it up, I couldn't get any of the preset
>> buttons to work. It seems that they were stuck on 1A. The chord memory was
>> stuck too.
>>>
>>> -Mike
>>>