Hi Andy
Thanks for that :0)
I've converted a number of US machines to UK voltage and repaired various faults on my gear successfully (vintage kit needs maintenance).
Was just wondering if anyone had a particular recommendation of a specific model transformer for the PolySix in respect of it's build and desirable noise characteristics.
Cheers!
On 17 Jul 2011, at 15:49, "Andrew Jury" <andy@networkjabber.com> wrote:
> If you can’t work this out for yourself then I would be very carefully
> poking around on the primary side of the mains supply!! However, as long as
> you promise not to sue anyone if it goes wrong then the 50VA transformer
> with 2 x 25v secondary windings might be what you are looking for.
>
> Cheers,
> Andy
>
> On 17/07/2011 13:44, "tim p" <target9@hotmail.com> wrote:
>
> >
> >
> >
> >
> >
> >
> > Hi everyone
> >
> > I've recently converted an MKS-70 from US 117 to UK 240v, a simple job as the
> > transformer had 240v taps.
> >
> > I've decided to convert my US rated PolySix, but the internal transformer does
> > not have 240v taps.
> >
> > Can anyone please help with recommendation of a transformer they have used to
> > successfully convert to UK?
> >
> > Thanks!
> >
> > Tim
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]