Well shit, two different people have offered to help you. Perhaps you
should log into the yahoogroups site for this list and view messages
by thread, then you should see the people who have offered to sell you
some.
Of course, I highly doubt that you'll read this message to follow my advice.
-ben
On Thu, Jun 10, 2010 at 10:09 AM, Roger <rogerengman@bredband.net> wrote:
> Hello again to you all.
>
> What really happened to my humble request.
> Could someone help me and sell the black pieces between
> the micro switch and hat to me or not?
> I would really appreciate it if you got in touch with me if so.
>
> Thanks in advance.
> Roger. :-)
>
> --- In PolySix@yahoogroups.com, "Roger" <rogerengman@...> wrote:
>>
>>
>>
>> Hello again.
>> I'm open to any suggestions regarding these buttons that I need.
>> My life would have a new meaning if I could get a hold of three pieces of these black middlepieces.
>> If they have LEDs its fine by me and if there is a cap mounted in any colour, that is fine also.
>> Everything is working fine though except these black things holding the cap in the right position.
>> The synthesizer looks so sad with some buttons broken and its making me sad as well.
>> Every single "Korg Polysix" deserve to have good looks and to work correctly i think so my project with this lovely item continues.
>>
>> --- In PolySix@yahoogroups.com, Dave Garfield <daveogarf@> wrote:
>> >
>> > Hi, Grandpianoguy!
>> > Â
>> > I have some middle pieces for the Korg switch-buttons. How many do you need? And do you need the LEDs as well?
>> > Â
>> > Dave Garfield
>> >
>> >
>> >
>> >
>> > ________________________________
>> > From: grandpianoguy <rogerengman@>
>> > To: PolySix@yahoogroups.com
>> > Sent: Mon, May 17, 2010 5:04:16 PM
>> > Subject: [PolySix] I want to buy the buttons "middlepiece"
>> >
>> > Â
>> > I would love to buy some buttons for my synthesizer.
>> >
>> > A couple of buttons are broken and they needs to be replaced.
>> > The switch is working just fine and i havent lost any caps.
>> >
>> > Just to clarify, after having taken these things apart, the piece I need is the
>> > black frame assembly with the LED that goes around the actual switch itself.
>> >
>> > Hopefully somebody somewhere will have one or two fore sale.
>> > Any advice i can get regarding these things would be wonderful.
>> >
>> > With friendly regards, The "Swedish style" Polysix-owner ;-)
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>>
>
>
>
>
> ------------------------------------
>
> PolySix "Digiest" Page: http://www.acc.umu.se/~amber/Poly6Yahoo! Groups Links
>
>
>
>
--
.sig
-Chromatest J. Pantsmaker
http://www.chromatest.net