Archive of the former Yahoo!Groups mailing list: Discussion about the Korg PolySix synthesizer

According to the calibration manual, the waveform at CN03-5 should look
like this:

[Click for a larger image. Opens in a new window]
<http://01eea9c.netsolhost.com/poly6/cal_snipet_large.jpg>

Mine looks like this:

[Click for a larger image. Opens in a new window]
<http://01eea9c.netsolhost.com/poly6/cn03-5_read_large.jpg>

The controls are set like this:

[Click for a larger image. Opens in a new window]
<http://01eea9c.netsolhost.com/poly6/vca_adjust_presets_large.jpg>

Does anyone see something blatantly wrong? Any ideas? I've performed the
battery swap. I went throught the cal procedure after the battery
operation and this waveform looked fine. The only other mod I've done is
that PC1 was replaced with a VTL5C3 and R93 was changed to a 1k2 ohm.
-Sam



[Non-text portions of this message have been removed]