check de pcb traces comming for that section... maybe one of those it's broken, specially if the battery was leacked chekc the switches .. there are many things that could cause that problem. .. check the schematic to find out the traces. I had a similar problem..
good luck,
roginator1 <
roginator1@yahoo.com> wrote:
HI Group..
Im just in completing third Polysix from 4 non-working P6s...
I have one problem with one CPU Board.....
Hmmmm....
Everything is working ?!? except VCF and adsr section....
I managed to make work program section, arpeggio, Mod section and
VCO....
CPU board is as far as I checked OK ..cleaned and re-traced ....
added new 7408....also I tried with working CPU board from other
Polysix and then P6 work.....
anybody had this problem?????
any cure...I cant find wich part on CPU Board is not working
VCF controls acts strange
HELP
Damir
PolySix "Digiest" Page:
http://www.acc.umu.se/~amber/Poly6 SPONSORED LINKS
Electronic instrument Synthesizer music Electronic music Music sampler Electronic musical instrument
---------------------------------
YAHOO! GROUPS LINKS
Visit your group "PolySix" on the web.
To unsubscribe from this group, send an email to:
PolySix-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
---------------------------------
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
[Non-text portions of this message have been removed]