Hi Jeff-
Could be an SMS-3 card like mine, if it was mounted
in the late '70s. Mine has the card model number
stenciled on the bottom of the card, opposite the big
capacitor, near one corner (I believe). It is just
visible under the heatsink. Wedge a mirror behind the
corner, see if you can see it. Yes, yours has a novel
mounting location, but the heatsinks are oriented
correctly.
Interesting to note that my unit is #1221, just a
few minutes younger that the one you mentioned. My
motor controller is mounted on the wooden subchassis,
just above the power supply (where the CMC-10 once
resided).
-Bruce Daily
--- john barrick <
astroboy@cinci.rr.com> wrote:
> I'm probably wrong, but this looks like a picture
> that I saw of an SMS2.
> jb
>
>
>
> jeffc@netaxs.com wrote:
> >
> >
> >
> > m400s #1190 and it's controller:
> >
> > http://www.netaxs.com/jcoulter/1190-bondage.jpg
> > <http://www.netaxs.com/jcoulter/1190-bondage.jpg>
> >
> > http://www.netaxs.com/jcoulter/1190-controller.jpg
>
> >
> <http://www.netaxs.com/jcoulter/1190-controller.jpg>
> >
> > anyone know this card?
> > it's mounted in the base rather than on the
> vertical.
> > i have an early 90s david kean card in #364, and i
> don't
> > recall what the one i put into #1220 looked like
> anymore.
> >
> > it will be fired up this weekend to identify the
> tapes.
> >
> > ...jeff
> >
> >
>
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ