Hey Clay:
Thanks for the post. I haven't really touched the key tension since I replaced the rollers on both trons. Both are probably too tight.
Now I'd like to give someone a bollocking right now, as lots of others like to do, but I can't think of anything to give anyone a bollocking about...er... with which to give someone a bollocking (Blechta and infernal grammar is lurking about, fer sure).
Cheers,
Dan
--- In newmellotrongroup@yahoogroups.com, "ceccles_ca" <ecclesreinson@...> wrote:
>
> Over the past 9 years I have only touched the key tension nuts to add tension to fix a few sticky keys. Last week I adjusted them all from scratch. All 35 nuts needed at least 1 and 1/2 turns before the keys dropped from the height bar. I gave them all about a 1/4 turn to bring them up to the bar, then another 1/4 turn of tension.
>
> If you do the math, I was roughly one full turn too heavy on the tension. I adjusted the pads and rollers as well, following Martin's directions for "fast action". (<--There's potential for a joke here!)
>
> The keyboard has a effortless feel now. I get a nice soft "clunk" sound from all the keys when they hit bottom and they all feel the same.
>
> Clay
>