You forgot “2. Enlist a GOOD LOOKINGfriend.”
From:newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of tronbros@aol.com
Sent: Wednesday, July 16, 20083:55 PM
To:newmellotrongroup@yahoogroups.com
Subject: Re: [newmellotrongroup]lacing/replacing tapes...
Jeff Baby,
1) Take the red reel that says 1 - 12.
2) Enlist a friend
3) Obtain scissors, 1/4" spicingtape and screwdriver.
4) Demag metal objects
5) Sex with a whore
6) Undo first reel and look for punchedhole. Cut across it.
7) Splice new tape to the end of theold tape i.e. the tail of the low G on the front tape retaining bar of theframe.
8) Sex with friend
9) Loosen first two retaining screws offront retaining bar.
10) Allow spliced joint to pass underscrews.
11) Ask shagged out friend to hold thetail of the tape to be replaced...AND NOT LET GO..and then undo the tworetaining screws on back retaining bar.
12) As friend pulls old tape out,you allow new tape in until the 'start' mark line is just before the head gapof the tape head and the loop length is the same as the other remainingtapes. Secure first screw on front retaining bar.
13) Ask friend, who has now recovered andwants more of you, to tighten the first screw of the back retaining bar. The new tape is now secure.
14) Cut tape at next punched hole.
15) Repeat 34 times stopping for casualsex when the mood takes you. I forgot to include the courtesytissues. Sorry.
Best,
M
Streetly Pornographics - All Things Mellotronic![](\"cid:image001.jpg@01C8E7E3.99E5B620\")
www.mellotronics.com
US Sales East: Jimmy MooreJMoore6397@aol.com
US Sales West: Paul Cox pjc56@earthlink.