Archive of the former Yahoo!Groups mailing list: The Mellotron Group

---I'm not near the studio right now but it is right next to the motor in bettween the
motor itself, the wooden mount and the belt pulley. If you don't have one then our servos
are different, I will look for some photos.

In newmellotrongroup@ yahoogroups. com, "tomdcour" <tomdcour@.. .> wrote:

>
> Yes indeed--- In

href="mailto:newmellotrongroup%40yahoogroups.com">newmellotrongroup@ yahoogroups. com, "tomdcour" <tomdcour@>

> wrote:
> >
> > ---I'm

not an "expert" but I had trouble with my servo at one point, giving the wobble

> > effect you describe. I cleaned the tape head that was reading sync

information off the

> > motor gear- it was absolutely covered with

crap. After that my tron limped along

> famously
> > for years

before Mr. Korb completely healed it. BTW I think I have cmc2 on #390

> >
> >
> > In

href="mailto:newmellotrongroup%40yahoogroups.com">newmellotrongroup@ yahoogroups. com, "Hessel Herder" <hessel@> wrote:

> > >
> > > How

is yours behaving then ? : )

> > >
> > >
> > > _____
> > >
> > > From:

href="mailto:newmellotrongroup%40yahoogroups.com">newmellotrongroup@ yahoogroups. com

> > > [mailto:

href="mailto:newmellotrongroup%40yahoogroups.com">newmellotrongroup@ yahoogroups. com] On Behalf Of mellotronist

> > > Sent: dinsdag 27 november 2007

13:28

> > > To:

href="mailto:newmellotrongroup%40yahoogroups.com">newmellotrongroup@ yahoogroups. com

> > > Subject: Re: [newmellotrongroup] CMC4
> > >
> > >
> > >
> > >
> > > I believe that's

the closest to my #886 that I've seen yet.

> > >
> > >

#920

> > >
> >
>