---I'm not near the studio right now but it is right next to the motor in bettween the
motor itself, the wooden mount and the belt pulley. If you don't have one then our servos
are different, I will look for some photos.
In
newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@...> wrote:
>
> Yes indeed--- In newmellotrongroup@yahoogroups.com, "tomdcour" <tomdcour@>
> wrote:
> >
> > ---I'm not an "expert" but I had trouble with my servo at one point, giving the wobble
> > effect you describe. I cleaned the tape head that was reading sync information off the
> > motor gear- it was absolutely covered with crap. After that my tron limped along
> famously
> > for years before Mr. Korb completely healed it. BTW I think I have cmc2 on #390
> >
> >
> > In newmellotrongroup@yahoogroups.com, "Hessel Herder" <hessel@> wrote:
> > >
> > > How is yours behaving then ? : )
> > >
> > >
> > > _____
> > >
> > > From: newmellotrongroup@yahoogroups.com
> > > [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of mellotronist
> > > Sent: dinsdag 27 november 2007 13:28
> > > To: newmellotrongroup@yahoogroups.com
> > > Subject: Re: [newmellotrongroup] CMC4
> > >
> > >
> > >
> > >
> > > I believe that's the closest to my #886 that I've seen yet.
> > >
> > > #920
> > >
> >
>