I have just received some great close-up pictures from the outside (thanks, David!). But the inside is still a bit of a mystery to me.
Thanks,
Ben
> On 26 Jul 2017, at 14:34, John Wright jwright911703@gmail.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:
>
>
>
> The red lense in the photo looks pretty close to me.
>
> On Wed, Jul 26, 2017 at 5:27 AM, John Barrick barrickjohn262@gmail.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:
>
>
> Ben, the red lens cap screws onto the threads on the the switch. If I can find mine (put it away for safe keeping), I can at least give you exterior dimensions.
>
> On Wed, Jul 26, 2017 at 4:11 AM, Ben Stuyts yahoo@stuyts.nl [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:
> [Attachment(s) from Ben Stuyts included below]
>
> Hi John,
>
> Any info is appreciated, thanks! I did a quick test print, and it looks like it might work. :) See attached photo.
>
> If yours is broken, I’d be interested to have a photo of the inside. I have no idea how it actually was fixed on the switch. I see a little vertical slit, and then there’s sort of a round snap ring.
>
> Ben
>
>
> <UNADJUSTEDNONRAW_thumb_1a03.jpeg>
>
>
>> On 25 Jul 2017, at 23:40, John Hammaren hammaren@geoconcepts.com [newmellotrongroup] <newmellotrongroup@yahoogroups.com> wrote:
>>
>>
>>
>> Hi,
>> I have had the same idea, but never got around to buying the printer yet. I will dig around for the pieces of mine that I think I saved for the exact purpose. Will forward info if I find something. In any case, please add me to the list. Rather than bust fingers turning on the switch I put it on a remote wall switch, but it would be nice to fix that issue. Thanks Ben
>> John
>>
>> From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com]
>> Sent: Sunday, July 23, 2017 12:48 PM
>> To: newmellotrongroup@yahoogroups.com
>> Subject: [newmellotrongroup] 3d printed M400 power cap
>>
>>
>> Hi,
>>
>> I have found this really nice transparant red filament for my 3D printer, so I thought I’d have a go at printing a cap for my M400’s power switch.
>>
>> Problem is obviously that I do not have the original cap. I’d greatly appreciate it if somebody could supply me with some close-up photo’s and/or dimensions.
>>
>> Best regards,
>> Ben
>>
>>
>>
>
>
>
>
>
> --
> john barrick
>
> ∗Leo got it right the first time∗
> ∗then he added a second pickup and got it righter∗
>
>
>
>
>
>