Archive of the former Yahoo!Groups mailing list: The Mellotron Group

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: Alcohol / Pinchrollers

From: "Bernie" <kornowicz@cox.net>
Date: 2007-11-25

Can you use Graves 190? Whatever's left over could then be mixed
with beer and punch for a little Hop, Skip and Go Naked.

Bernie

--- In newmellotrongroup@yahoogroups.com, lsf5275@... wrote:
>
> If you must use alcohol, denatured alcohol works fine. Oiling
pinch rollers
> is a temporary fix, at best. Oil attracts dirt and the rollers
eventually
> stick again. I usually pop the roller out of the key spring
(carefully) and clean
> the axle with a Dremel tool and a wire wheel. Then I clean and
deburr the
> inside of the hub until it spins freely on the axle. I then
reinsert the axle
> and roller into the spring. and re-peen the axle ends. This is a
permanent
> fix. The roller will never again require oil.
>
> Frank II
>
>
>
> ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗Check out AOL's list of
2007's hottest
> products.
> (http://money.aol.com/special/hot-products-2007?
NCID=aoltop00030000000001)
>