| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
Well, if you have the ear chops of Tronsaver Frank, you don’t need no stinkin’ scope, but for me a scope is needed .like I said, the Bridechamber kit is really geared for MOTM. If I ever get around to finishing that module, I think I will just drop the MOTM version in my setup and get the converter from Synth.com. The PCB from Haible is first-class btw, and he was as helpful as could be…….damn, now you’ve done it – I will have to go and finish the bloody thing!
From: newmellotrongroup@yahoogroups.com [mailto:newmellotrongroup@yahoogroups.com] On Behalf Of john barrick
Sent: Monday, September 26, 2011 9:43 AM
To: newmellotrongroup@yahoogroups.com
Subject: Re: [newmellotrongroup] ID The Keyboard?
Well, I can solder, but I can't read no scope. Guess it's on to plan C then. If anyone knows what plan C is, would you let me know?
On Mon, Sep 26, 2011 at 7:22 AM, John Hammaren <hammaren@geoconcepts.com> wrote:
I bought the BB chips from vintageplanet.nl . Nice outfit. I did start my project and did get the kit from Bridechamber, also nice guys. I should point this out if anyone decides to jump in to the Haible project. The Bridechamber kit is not everything, and is built on the MOTM platform, not Moog, thus some work to deal with the different power supply requirements is necessary. Some of the Bridechamber caps were hard to identify unless you have a lot of hands-on experience, and finally the Dragonfly treatment of this build is great but drops off about 80% through the build. The rest of the stuff except the BB chips can be found at Mouser or DigiKey. The bottom line – if you haven’t built anything of even medium complexity, as we say up here – fuggettaboutit. And a decent scope is a necessity.
--
john barrick
∗Leo got it right the first time∗
∗then he added a second pickup and got it righter∗