Archive of the former Yahoo!Groups mailing list: The Mellotron Group

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [newmellotrongroup] Re: I goofed

From: lsf5275@aol.com
Date: 2010-12-10

Nope, but you're getting close. The clips are not required for the machine to operate correctly.
 
In a message dated 12/10/2010 1:13:59 P.M. Eastern Standard Time, pocotron@yahoo.com writes:
 

It would be much easier to put the headblock on if the W clips were installed first.
 
  -Bruce D.


--- On Fri, 12/10/10, Rick Blechta <rick@rickblechta.com> wrote:

From: Rick Blechta <rick@rickblechta.com>
Subject: Re: [newmellotrongroup] Re: I goofed
To: newmellotrongroup@yahoogroups.com
Date: Friday, December 10, 2010, 11:04 AM

 

On Dec 10, 2010, at 1:01 PM, lsf5275@aol.com wrote:

That's why I suspected you were merely being lazy.  So find the error. Hint: Something in the first picture is wrong. If you don't look at a 400 a lot, you'll not likely see it. I'm sure Martin saw it right away. It was not critical, but the machine could not work correctly as is was.

Well, it certainly wouldn't produce much of a signal without the headblock!