Archive of the former Yahoo!Groups mailing list: The Mellotron Group

On Sun, Oct 31, 2010 at 6:23 PM, Bruce Daily <pocotron@yahoo.com> wrote:

 

Hey Nick-   If Martin diesn't respond first...   5 amp standard fuses all around.  They should be rated 250 volts.  If one blows, get the unit troubleshot.  Good luck!     Just a minute, gotta go unplug mine...      -Bruce Daily   #1221 --- On Sat, 10/30/10, Elwood Dowd <epdowd54@yahoo.com> wrote: From: Elwood Dowd <epdowd54@yahoo.com> Subject: Re: [newmellotrongroup] Power consumption of an M400 To: newmellotrongroup@yahoogroups.com Date: Saturday, October 30, 2010, 7:15 PM   Don't they burst into flames if you leave them plugged in? From: Rick Blechta <rick@rickblechta.com> To: newmellotrongroup@yahoogroups.com Sent: Sun, October 31, 2010 12:38:29 PM Subject: Re: [newmellotrongroup] Power consumption of an M400   On Oct 30, 2010, at 5:07 PM, nickhewitt25 wrote:   Good Evening one and all As a few of you know, I recently acquired an M400, serial number 360. One thing I've never seen is a technical manual for an M400, which, as an Electronic Engineer, would interest me a lot. I'd like to know the power consumption of an M400, as I need to know the size of fuse to stick in the mains plug. Also, does the M400 create power surges during normal operation, including the switch-on surge?   Nick, Edinburgh Nick, You need to speak with the Official Mellotron Wankers of Streetly Electronics in lower downtown Uppppper Blithbury, Slightly North of Rugely Somewhere in the Midlands of the United Kingdom. In other words, call Martin. He'll give you the correct gen and he might even answer your questions. Trust me. Rick PS As an Electronic Engineer, believe me when I say that you don't want to know about all this. You have to take it on faith...