Date: Sun, 31 Mar 2002 14:08:27 +0800
From: "drew" <
hoovertime@...>
Subject: RE: [AH] checking mks-80 voices?
for the archive......
ok after checking the jupiter-6 service notes seems the mks-80 works the
same, theres a jig switch on the processor baord the bottom one near the
front right hand side, switch this to "jig" after power up.
seems like the mks-80 must be closer to the jp-6 after all ;D
-----Original Message-----
From: drew [mailto:
hoovertime@...]
Sent: Sunday, 31 March 2002 12:18 PM
To: Ah
Subject: [AH] checking mks-80 voices?
hi,
recently purchased a version 4 mks-80 of evil bay, & turns out 2 of the
voices are playing up.
I dont have the service notes, so what is the procedure to put the mks80 in
the "check the voices mode" ? ;D
ive checked the archive to no avail, but did find this which seems apparent
in my mks-80.
"I've seen a few MKS80s in my day and two of them had dead CEM
3360 dual VCA chips in them. Check to see if you hear any bleed-through
when no voices are playing........."
one of the voices just seems to lay low with constant sustain, avoiding all
envelope settings etc......
until then...........
------------------------------