-----Original Message-----
From: Mark Strijbos [mailto:
m.strijbos@...]
Sent: Friday, October 26, 2001 3:40 PM
To:
analogue@...Subject: [AH] Re: [AH} Jupiters
> whoa. i missed that... so the big white button is just a switch to
> turn on the main LFO's sine wave to the corresponding sliders in the
> performance section.. or am i missing something else.
more or less - in fact the modulation amount sliders are replicated
in the left-hand controller section and they work more or less in
tandem. If you set the VCO freq mod slider on the main control
panel it is always "on".
The settings on the left-hand panel however come only into play
when you press that white mod button. This can also be used to
set two different levels of modulation because they override the
main panel settings
BTW: when you press the mod button you apply the currently
selected LFO waveform, not just the sine
> the jp6 has 2 seperate LFOs then.
the JP-8 got two of them as well to allow different mod settings for
the bi-timbral modes. Unfortunately there is no way to use them
both in a single patch. IMHO the lack of a second LFO is the most
irritating 'feature' of this awesome machine
Mark S. (gear slut)
770 A-100 CZ-101 D-10 DPM-SP DX-9 JP-4 JP-8
M-1000 MAQ16/3 MS-20 MS-404 OCTAPAD-II PD10
PRODIGY PULSE+ SDS200 SE-1X SBF-325 SRE-555
SOLINA TR-606 TR-808