-----Original Message-----
From: Lars Johansson [mailto:
lasse@...]
Sent: Sunday, August 26, 2001 10:39 PM
To: Analogue Heaven; Neal Acharya
Subject: SV: [AH] Please Help my jupiter6
Hi Neal,
depending wich software revision you have, the JP-6 will power up in Omni
mode. To select Poly mode, you press and hold the tune button while pressing
the patch select buttons 1-8 ( or patch group 2, patch select 1-8 for
channel 9-16 ). When using the JP in split mode it will recieve on two
channels, the one you choose ( upper ) and +1 for lower.
Here is a link for more info:
http://www.chez.com/siliciumalpha/JP-6-service-notes/Jupiter-6-servicenotes.htm
Good luck,
LJ
http://hem.spray.se/ppgwave/studiopics.html ----- Original Message -----
From: Neal Acharya <nacharya@...>
To: <analogue@...>
Sent: Sunday, August 26, 2001 10:26 PM
Subject: [AH] Please Help my jupiter6
I don't know what's going on but my jupiter6 is stuck in omni mode! I just
got the unit recently and when hooking it up to midi I realized it was
receiving on all channels. Also, I can't access both timbres in split mode
via midi. I was told that it is a bitimbral synth and the first sound can be
accessed via midi channel1 and the second can be accessed via channel2. I
can't do this on mine. Do i have an older version of the jp6. Please help
me, I need to know if I can get this thing fixed or if there is some setting
I can enable to make it work with omni off and have access to both timbres
individually via midi.
Please email your responses to:
nacharya@...
and
neal.acharya@...
Thank you