Archive of the former Yahoo!Groups mailing list: All about the Roland Jupiter-series

previous by date index next by date
previous in topic topic list next in topic

Subject: FW: [AH] Jupiter 6 and MIDI

From: "Verschut, Ricardo" <ricardo.verschut@...>
Date: 2000-12-11

-----Original Message-----
From: Cary Roberts [mailto:cary.roberts@...]
Sent: Monday, December 11, 2000 5:49 AM
To: Doug; Analogue Heaven
Subject: Re: [AH] Jupiter 6 and MIDI

>(Yes! it's bi-timbral.. now if
>only those europa boys would make a hack that allows each channel it's own

This wouldn't be too hard. The JP6 uses two MKS80rev4 voice boards.
One is fully populated and the other is half populated. Hence
the 2+4 and 4+2 split options. You may be able to directly tap
off of these, or it might require an opamp as a current to voltage
converter. I haven't really looked at the schematics so I'd have
to crack open my JP6 to give you a definitive answer. And if
you didn't want to drill holes in the rear of the JP6, you could
rewire the XLR as a lower/upper out.