-----Original Message-----
From: caleb de la Mare [mailto:
buzzardszun@...]
Sent: Wednesday, December 08, 1999 11:14 PM
To:
Ricardo.Verschut@...Subject: RE: [AH] Jupiter-8 problem!!!
thanks again, what izz the best way of testing this LFO switch...oh yeah I
noticed that there are two switches underneath that white cap...are they
both switches??? yep I tested it again.....the 4th voice OSC 2 cuts out
after 10 minutes of operation, although it can still be heard, very faint.
The res and cut-off filter work on the 4th voice 2nd OSC...its just very
faint.....would that be an amp perhaps,,,,as the filter stil works...its
just faint?
oh yeah...guess what....I dont do gigs...too many compromises
>From: "Verschut, Ricardo" <Ricardo.Verschut@...>
>To: caleb de la Mare <buzzardszun@...>
>Subject: RE: [AH] Jupiter-8 problem!!!
>Date: Tue, 7 Dec 1999 09:49:33 -0600
>
>~ the only thing that does not work is that LFO
>~ white button,
>~ and the knob for the lfo rise time, the portamento works
>~ fine, what i think
>
>The LFO-button (the white one) has the reputation of being a bit sloppy
>with
>reacting to the presuure you put on the cap... In other words, these things
>break easely. I'm currently installing my fourth (!) LFO button... You
>might
>want to replace the button and the electronics underneath with a new block
>(if you can get one).
>
>~ i just realized is that the jp only skips this note on the
>~ 4th voice only in
>~ the test mode. when powering up in normal mode as ya said, i
>~ think it works
>~ fine. thanks.
>
>You really should test this to be on the safe side. You don't want the JP
>to
>drop out on you on a gig...? Do you?
>
>Cheers,
>RVe
>