--- In
AN1x-list@yahoogroups.com, "Summa" <flotorian@f...> wrote:
> Hi,
>
> I'm mostly building sounds from scratch, but can't remove that Mod-Wheel->Vibrato
> connection. Checked the whole GUI including Control Matrix and turned off all FX.
> I'm using the AN200 Editor, is there some kind of global vibrato setting I'm not
> able to reach from within that software or is it hardwired connection?
>
> Thanx for your help!
>
> ...Summa
You need to make certain the valus for Amod Depth (VCA), Fmod Depth (VCF) and Pmod
Depth (for both VCO1 & VCO2) are set to '0' in your Voice to eliminate any
modulation which would occur at Key On. There is no "global vibrato setting."
Under the Ctrl Matrix you will find 'Source' assigned to A. MW and 'Param' set to any of
Amod Depth, Fmod Depth and/or Pmod Depth - particluarly the latter - on MANY of the
factory supplied Voices. A -/+ numeic value for Depth under the Ctrl Matrix serves as an
offset to the programmed mod depth. A value of 'dirct' for Depth under the Ctrl Matrix is
exactly that - a direct control of the mod depth.
Hope this helps.
Jon