wild guess
check power supply...
there is a darkstar on the darkstar group that does the same thing too... no response yet what he found... we believe it got banged in shipping...
so that is another question, no hard knocks or bangs to the unit?
I said power supply as you said the lights flicker...
dale
Administrator for Kay-Net.com
admin@...Lancaster CA
661-723-0266
Great group to talk about all things
musical @
signature_riffs_of_the_pros-subscribe@yahoogroups.comband web pages
Inquisitor Betrayer
http://www.soundclick.com/bands/7/inquisitorbetrayermusic.htmAngel's Wings
http://www.soundclick.com/angelswings ----- Original Message -----
From: sulurawk
To: AN1x-list@yahoogroups.com
Sent: Sunday, December 12, 2004 5:25 PM
Subject: [AN1x] AN200 Restarts itself....
Hi!
I have recently started experiencing a problem with my AN200 Loop
Factory. It restarts itself as soon as you turn it on. It does the
startup sequence on the display, then simply restarts. When it does
start properly, the orange buttons flicker slightly, the flickering
is more intense if more LED's are lit. But as soon as you press play,
it restarts. I've tried doing the reset procedure. I've also tried
cleaning the unit, and I made sure the grounds were making good solid
contact on the access panel.
The machine is completely useless right now, because the moment you
start the sequencer, or press any buttons, it restarts.
Any help would be appreciated!
Nate
[Non-text portions of this message have been removed]