--- In
AN1x-list@yahoogroups.com, "Timo Sandholm"
<timo.sandholm@u...> wrote:
> Hi Jon,
>
> Thank you for the answer, hope I understood it correctly :) ... So
this is
> what I understood: I need to program my AN1x so that the patch (or
was it
> called program?) I'd like to use must have PitchBend setting in
range -12 to
> +12. Then I need to program my midi pedal so that there is one
pedal which
> sends PitchPend with value 0 (one octave down) and then one pedal
with PB
> value 64 (reset) and so on... Cool, it sounds like it could be
working :) I
> need to try this back home today.
>
>
>
> Cheers,
> TimoS
The dual pedal idea is what i was going to suggest. Do you stab the
pedal or hold as you could program one to pitch up on press & reset
on release and on the other pitch down on press & reset on release.
This would require you hold the pedal to transpose and release to
reset (toggle mode i think).
Is there a rocker type pedal on your controller or just on/off?
A rocker pedal would be easier to program with up/reset/down.
Regards
Richard