yea, that is what I am saying and Jon too. (not to put words into his thoughts but I believe he is thinking the same)
Latency has different meaning. I set mine at 25ms for mmv (audio), midi is near 3ms, audio recorded in at 5ms using the motu cubase mixer. Latency in what would be a better question... in sonar I set it at audio 7.3. I can go lower but then I will get some drop outs sometimes, depending on how many tracks I am recording at once.
Also, in some bios, you can set the pci latency there as well. In my case I have it at 0.
Also, there will always be at least 3ms between you, computer, synth and speakers (if the speakers are at a reasonable distance say 6 to 12 feet).
It adds up so you get the best you can and work it out to the lowest stable number.
dale
Dale Kay
Administrator Kay-Net.com
Lancaster CA
Bus 661.723.0266
admin@...Ampfea's ION group list
join at
http://www.ampfea.org/mailman/listinfo/ionizersBand Web page
http://www.soundclick.com/bands/7/inquisitorbetrayermusic.htm ----- Original Message -----
From: Aaron
To: AN1x-list@yahoogroups.com
Sent: Sunday, April 11, 2004 5:40 PM
Subject: [AN1x] Re: Bass
--- In AN1x-list@yahoogroups.com, "Dale Kay" <admin@k...> wrote:
> Once I switched off daisy chaining my midi, 90%+ problems went
away. I started off with a 2x2 midiman. Added a 3x8 splitter a week
later and now I use a 8x8, 2x2 and the 3x8 splitter, about to add
another 8x8. Works great in win of course as that is what I use with
Sonar 3.1.1. Latency, you will always have it but if you use good
equipment, you can keep it very low.
> I also use a MOTU 24i for audio in and out.
>
> Dale
>
> Dale Kay
> Administrator Kay-Net.com
> Lancaster CA
> Bus 661.723.0266
> admin@k...
>
> Ampfea's ION group list
> join at http://www.ampfea.org/mailman/listinfo/ionizers
>
> Band Web page
http://www.soundclick.com/bands/7/inquisitorbetrayermusic.htm
>
> [Non-text portions of this message have been removed]
So then daisy chaning midi is like trying to link them all together?
What your saying is just spend the money on a 8x8 interface and alot
of problems go away? Im sorry im just new to all this LOL. How much
latency do u have on your system?
aaron
Community email addresses:
Post message: AN1x-list@yahoogroups.com
Subscribe: AN1x-list-subscribe@yahoogroups.com
Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
List owner: AN1x-list-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/AN1x-list
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/AN1x-list/
b.. To unsubscribe from this group, send an email to:
AN1x-list-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]