Hi,
>It's written in the An1x manual that if you turn the "Edge" parameter
>to zero, the result will be a sine wave. Though, when using different
>waveforms with the Edge setting to zero, the result sounds different
>from each other. Which one will make the best sine wave?
I'd go with a 50% pulse wave, edge set to zero, then add some 24dB filtering with the keyboard tracking on to remove the leftover harmonics. Play around with the Cutoff until you start to hear the volume of the sine wave decrease, then turn the knob CW about one clock position (9:00, 10:00, etc.)
Regards,
-BW
--
Bruce Wahler
Ashby Solutions™
http://music.ashbysolutions.com978.386.7389 voice/fax
bruce@...