--- In
AN1x-list@yahoogroups.com, seb paiement <drillindrums@y...> wrote:
> I opened it and the card is in it but is there anybody who know how to disconnect
the wire attached to it and reconnect it to the cs6x it seems like i will have to cut it
but i'm no expert. if there is any other way please tell me.
>
> Seb
Seb,
Please edit your posts before hitting send! You quoted the entire thread - this is not
proper netiquette and is inconsiderate of the list. Thanks in advance.
Not having seen the interior of an AN200, I can imagine the 'wire' is similar to an ATA
cable affixed to a multi-pin port on the PLG150-AN. Have you checked whether there
are any screws that hold the card in place or is it simply a 'snap-on' affair? There's a
DX200/AN200 list here at Yahoo! Groups that you might want to ask if nobody on
this list can provide assistance. Or you might pop off an email to Kenton (they're
guru's when it comes to PLG cards) - perhaps they might lend advice.
Jon