Could you send me the patch , I don't have any originals left in my AN-1x , i think :-)
[in case you are new to sysex dumping]
select the patch , press "Bulk Dump" , select one voice and record into seq. or some Sysex program and export as a MID file (or Logic file if you use Logic).
and send me to personal e-mail..
p.s. though "Global" setting may make some influence here too ...
p.p.s. in fact , if that happens after global reset of An-1x, then I think you right that it's a broken ribbon :(
Ray.
----- Original Message -----
From: cernikj_98
To: AN1x-list@yahoogroups.com
Sent: Thursday, October 09, 2003 10:30 PM
Subject: Re: [AN1x] Ribbon stuck at lowest level
Thanks all for your help. It seems to me though that on every patch
that uses the ribbon it drops to the left edge once I touch anywhere
on the ribbon. Perhaps you can test this for me. On the stock
patch "Chick" 066, when I first bring it up and play it's sort of a
bright analog brass lead sound. Once I touch the ribbon (anywhere on
the ribbon) there is alomst no sound at all. Only a very muted pluck
sound. My assumption here is that the ribbon controller is stuck in
the left edge position because of a physical problem with the ribbon.
Can someone try that patch and let me know what you get? If you get
the normal sound rather than the muted one that should prove that
there is something amiss with mine.
Thanks again for all your help,
Joe
PS I reset all programs to the original values as instructed in the
manual.
[Non-text portions of this message have been removed]