--- In
AN1x-list@yahoogroups.com, "martinez21" <martin@b...> wrote:
> Hello all. I've just taken a bass sound on the AN1x and started
> fiddling around with it, as you do of an evening. I noticed that when
> you have one key pressed down, if you press another no note is
> triggered. I thought it might be due to the fact that it was in mono
> or legato mode, so I changed that to Poly and, just to avoid any
> other complications, I made sure Portamento was off and I switched
> Layer from Unison Dual to plain old Single. And yet the situation
> remains - I can play a three-note chord, say, but when I go to change
> one of the notes (with the others still pressed down), I get no noise
> from that new key.
>
> I've fiddled around with some of the parameters, opening up the VCA
> and VCF envelopes, for example, but that doesn't alter it either.
>
> I've probably overlooked something simple here, as usual. Any ideas,
> clever people?
>
> Cheers,
> Martin
Martin,
From your problem description I would hazard a guess you're not editing the Scene
you intended to - double check the Voice is not in Dual mode. I often overlook Dual
Mode and wonder why my edits are not effective - typically I'm editing the wrong
Scene in my Voice.
If the problem persists, and you've double checked the Mode is Poly -not Mono or
Legato - then I would suggest reinitializing the AN1x to it's factory default settings.
Jon