Thank you very much for your response and time.Any sound card
recommendations?Just a hobby for me so lower $$ range.I'm 58 years young
and having fun.JD
Jon wrote:
> Here are some suggestions:
>
> 1st, download and unzip the AN1x voices to a directory (folder.) Most
> the Voices from
> the Files section ∗should∗ contain the ∗.an1 suffix identifying the file
> type but not all
> do. If the file does not contain the ∗.an1 suffix, use the Open command
> in AN1xEdit
> to open the file and then use the Save command. This will create the
> correct file type
> bit which is sometime 'lost' going from Mac <> PC and/or Zip<>Sit.
>
> 2nd, once you have the file type sorted out and have a working Voice
> bank in
> AN1xEdit you can switch AN1xEdit into PLG150 Mode but it will _probably_
> close the
> currently open file and open an empty file - simply reopen the file you
> intended to
> work with while in PLG150 Mode
>
> If you receivet Buffer Full or Overrun messages the likely cause is your
> MIDI Interface.
> Cheap sound card MIDI Interfaces, i.e., SoundBlaster type cards, are NOT
> very robust
> and easily overrun by a data intensive files such as ∗.an1 files. Some
> USB MIDI
> Interfaces suffer the same. I suggest you attempt to transfer only a a
> few voices at a
> time or no more than the 1st 64 Voices in a bank to avoid the overload
> error. For the
> record, AN1x SysEx dumps are considerably larger on average than most
> synths. This
> is unavoidable and the the result of Yamaha's data structure design.
> This has been
> discussed at length on this list - if you're interested in learning more
> search the list
> archive for posts from Gary Gregson and you'll find this topic discussed
> often.
>
> Also, keep in mind the AN1x Voice structure allows for two Scenes per
> Voice where as
> your AN200 does not - and the Effects structure is not as comprehensive.
> This will
> likely result in some unavoidable discrepencies in sounds played back on
> the AN200.
> It's not a big deal - just something to be aware of.
>
> Post back if you need additional help.
>
> Jon
>
>
>
> --- In AN1x-list@yahoogroups.com, "leperajd" <lepera@c...> wrote:
> > I should add that a few times when loading to the an200 I got the
> > flashing error message 3 and 4.Buffer full etc.JD In
> > AN1x-list@yahoogroups.com, "leperajd" <lepera@c...> wrote:
> > > Hi,Using win 98.I tried loading voices to the an200 with the an1x
> > > editor as
> > > described below checking plg150an mode to load to an200 and it
> > doesn't
> > > work for me.I am downloading to desktop or floppy,then unzipping,no
> > > go,an1x editor window pops up, says wrong file version.I tried this
> > > with many patches to no avail.Am I downloading to wrong place or
> > ?.I'm
> > > a newbee to downloading patches.Maybe I need a primer on the steps
> > to
> > > downloading patches correctly.Thanks,Help appreciated JD LePera-- In
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> Click Here!
> <http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=1705032144:HM/A=1595055/R=0/SIG=124j83ehr/∗http://ashnin.com/clk/muryutaitakenattogyo?YH=3707890&yhad=1595055>
>
>
> Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.