--- In
AN1x-list@yahoogroups.com, "sonarcade"
<sonarcade@y...> wrote:
> --- In AN1x-list@yahoogroups.com, "sonarcade"
<sonarcade@y...> wrote:
>
> > I've noticed that the midi light doesn't come on the
> > pro53 for some knobs although the midi registers in Logic.
>
> I just realized that my control change mode was set on mode 1
and not
> mode 2. So midi's fine. But does anyone else that uses this
have
> any explanations and possible workarounds to the fact that the
wave
> parameter for VCO1 on the an1x is used as a swtich to only
> disable/enable the sawtooth wave and the fine param is used
to
> disable/enable the square wave? There's a slew of other
parameters
> that don't match between the AN1x and the Pro53 and I've tried
to
> manually "dump" a patch from the AN1x to the Pro53 using the
control
> map for the an1x that I have.
You'll need to edit the Controller Template to match the MIDI
CC's to suit your needs. I don't know how else to express that -
your application of the Controller Template is not what it was
intended for. You'll need to customize it to suit your needs if you
choose to continue with this course. The alternative is to build a
Logic Environment which remaps AN1x parms to Pro-53 parms.
> So it really seems like Timo's
> suggestion of using synthedit is the only way to get around this
> problem of not being able to find a way to dump patches onto a
VSTi.
No offense, but I think your time would be better spent studying
the principles of subtractive synthesis and applying those
lessons to your Pro-53. IMO, you're application of the Controller
Template "to dump patches onto a VSTi" is noteworthy but hardly
an adequate substitute for basic synth programming skills.
Jon