Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

I was wondering how you get the midi in signal to go out the midi out of the
an1x. I have a kaysound 4902 controller which is ran into the midi in of my
an1x, then the output from the an1x goes to a m audio quattro midi in port.
The Tx channel on the an1x is on 1 and the kaysound is on 2.

When assigning the midi channels to VSTis in Cubase SX I am only getting the
control from the an1x. If I plug the kaysound directly into the quattro then
the kaysound will work, but not if running through the AN1x.

I am guessing there is a setting in the AN1x to allow midi input to be echoed
through the output.

TIA,
Jake