so is there no way to convert the .mid files to say an1x files? The an200 editor can read an1x files but no mid files. I would be forever grateful if someone would take the time to do it for me! ;-)
--- In AN1x-list@yahoogroups.com, "marcogardengreen <marcoyyz@t...>" <marcoyyz@t...> wrote:
>
> Hallo Jon,
> hallo everybody.
>
> >> >The SysEx ID header for the AN1x is completey different from that
> >> >of the AN200. The AN200 will NOT accept the .MID transfer
> >> >regardless of what application you use to dump from PC ->
> >> >AN200. As a workaround, I would suggest the following:
> >> Well... Don't ask me why but it worked.
> >> I had a .all backup of an1x voices. (Cubase song).
> >> I played it back and all the voices were loaded on the An200!!!
> >>
> >> ANyway thanks for your proposal to upload my sounds on the
> >> directory and to let someone to convert it for me.
> >>
> >That's great for you! What's a .all file? I'm not familiar with
> that.
>
> .all is the file formata for Cubase VST songs.
> What I did should not be so different from importing the .mid voice
> backup to any sequencer and let it play...
>
> >I'm really surprised the Base Address ID for the AN1x worked for
> >the AN200 - live and learn.
> :-)
>
>
> >The FreeEG allows you to record, i.e., automate, paremter
> >adjustments for playback in real time. For example, you could
> >record adjustments to parameters such as Fliter Cutoff, VCO
> >Edge, VCF Attack and VCA Release so that they were saved as
> >part of the Voice and playback automatically upon a note on
> >event. Very cool.
> >The Feedback parameter take the signal output from the
> >Mixer->Filter->VCA and 'feeds' it back into the signal chain from
> >the Mixer - therefore creating a 'fatter' sound - good for leads and
> >basses.
>
> Interesting. I will try step by step seing how it works on
> the sounds...
>
>
> >> >I'd advise using An1xEdit for all editing..
> >> Well... I think that with An1xEdit you can't upload voices from
> >> An200 to the editor itself. Is it right ? In this case I will have
> to
> >> use
> >> the An200 editor that (I guess) should be able to...
> >
> >Actually, I think you might be able to if AN1xEdit is in PLG150AN
> >Mode - found under the Setup menu.
>
> I set the PLG150 mode the "request" button is disabled!!!
>
>
>
> Ciao
> Marco