Just in case you did not get my last question, here it is again.
I'm having trouble saving newly created voices with added comments in an1xedit.I have created a new user sequence from scratch.Not using any exg voices to start of with.Once I created the voice, I highlight the voice and went to both action/bulk section (in user mode),and pressed send.Then I pressed store current under action/bulk section(in user mode) sections,then saved the file as .anp file.I close down anx1edit,then recall it back again, go into user voices, but cannot find the voice with added comments? But I know which user voice number it is,so I highlight it,click on send under action/bulk, but here a difrent voice,so I refresh synth still here a diffrent voice.So I have to hit send and refresh a number of times till the voice I created comes back.But still with no name or comments on the patch?
Were am I going wrong?
I also heard that you can send sounds of the an150 to XG effects.How is this done,or am I getting cofused.
Regards
Dmanx.
> Hi DManx,
>
>I tried to answer your queries on AN file formats, but it got bounced. I
>also answered by private email. In case you didn't receive those emails,
>here they are again:
>
>_____________________
>
>
>To open ANS files simply set An1xEdit to PLG150AN mode (from setup
>menu), then use File open. The file dialog contains a dropdown list of
>file types recognised by AN1xEdit. Select XGworks AN PLG files (∗ANS)
>and you should be able to see the target ANS file. Select it and open as
>usual.
>
>You should note that ANS files do not maintain the comments and system
>parameters of AN1 & ANP files. Therefore you should avoid the use of ANS
>except for compatibility with the XGworks (and derived standalone)
>editor.
>
>Furthermore ANS files are subject to the same parameter conversion
>restrictions as ANP files when saving to AN1x AN1 format (see the
>introduction section of the An1xEdit Help file for details)
>
>Regarding An200 and An150, it is true that the AN200 uses the PLG150AN
>card inside the box. However it also provides a hosting section that
>contains an XG effects unit and drum parts. Also the PLG150AN (and thus
>the AN200) do provide the arpeggiator and step sequencer of the AN1x!
>
>__________________________________
>
>Morphing on the PLG150AN card (and the AN200) is slightly different to
>the AN1x. On the AN1x, morphing is provided between two scene memories
>of a single patch. However in the PLG card, there is only one scene per
>patch. Hence morphing is provided between the current patch and a patch
>stored in the preset or user banks.
>
>To setup morphing using An1xEdit in PLG150AN mode:
>
>1) In the System area (above the onscreen keyboard) set the MSB dial to
>the desired morph bank (USER, XG-A or XG-B).
>
>2) Set the LSB and PROG dials to choose the desired patch from the bank
>
>3) Turn on the MORPH LED
>
>By default the Mod wheel will control the morphing. However the
>controller can be changed using the SCENE CTRL dial.
>
>__________________________________________
>
>To answer you recent questions. It sounds to me as though you are saving
>as ANS files, which do not contain comments. Otherwise, you are simply
>confused as to what file you are saving and reloading.
>
>Also how do I send an150 sounds to xg effects?
>
>What exactly do you mean by this???
>
>Regards
>
>Gary Gregson
>email: gary@...
>
>
>
>
>-----Original Message-----
>From: DMANX@... [mailto:DMANX@...]
>Sent: 11 January 2003 19:13
>To: AN1x-list@yahoogroups.com
>Subject: [AN1x] Voices
>
>
>Hi,
>I'm having trouble saving newly created voices with added comments in
>an1xedit.I have created a new user sequence from scratch.Not using any
>exg voices to start of with.Once I created the voice, I highlight the
>voice and went to both action/bulk section (in user mode),and pressed
>send.Then I pressed store current under action/bulk section(in user
>mode) sections,then saved the file as .anp file.I close down
>anx1edit,then recall it back again, go into user voices, but cannot find
>the voice with added comments? But I know which user voice number it
>is,so I highlight it,click on send under action/bulk, but here a difrent
>voice,so I refresh synth still here a diffrent voice.So I have to hit
>send and refresh a number of times till the voice I created comes
>back.But still with no name or comments on the patch?
>Were am I going wrong?
>
>Also how do I send an150 sounds to xg effects?
>
>Regards
>Dmanx.
>
>
>
>Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
> <a Target='_new' Href='http://talk21.btopenworld.com/redirect.html?http://groups.yahoo.com/group/AN1x-list'>http://groups.yahoo.com/group/AN1x-list</a>
>
>
>Your use of Yahoo! Groups is subject to <a Target='_new' Href='http://talk21.btopenworld.com/redirect.html?http://docs.yahoo.com/info/terms/'>http://docs.yahoo.com/info/terms/</a>
--------------------
talk21 your FREE portable and private address on the net at
http://www.talk21.com