Hi Paul,
>I use my An1x together with a hardware sequencer, the Yamaha RS7000.
>When I use the An1x as a midi controller in local-off mode I do not
>get the same sounds as I get in Local-on mode.
>
>AFAIK my sequencer doesn't filter any MIDI messages. Could it be that
>some effects/setting are only used in the Global mode? Is there a way
>to change this so my An1x sounds the same in local-off as it does in
>local-on?
I think what is happening is that your sequencer is set to echo the notes that come in. That way, when you press a note in Local On, you actually get TWO identical notes, one from the keyboard, and one from the sequencer. Try going into the sequencer and changing the "MIDI echo" or "local echo" command (or something similar) to off.
Alternatively, you could always use Local Off with the sequencer.
Regards,
-BW
--
Bruce Wahler
Design Consultant
Ashby Solutions™
http://consult.ashbysolutions.com978.386.7389 voice/fax
bruce@...